Configuring Multi-site IPsec VPN

The availability of this feature depends on the service quotas that are enabled for your account.

You can configure a Multi-site IPsec VPN connection in the following two ways:

  • from the Disaster Recovery > Connectivity tab.

  • by applying a protection plan on one or several devices, and then manually switching from the automatically created Site-to-site Open VPN connection to a Multi-site IPsec VPN connection, configuring the Multi-site IPsec VPN settings, and reassigning IP addresses.

Connectivity tab

To configure a Multi-site IPsec VPN connection from the Connectivity tab

  1. In the Cyber Protect console, go to Disaster Recovery > Connectivity.
  2. In the Multi-site VPN connection section, click Configure.
    A VPN gateway is deployed on the cloud site.
  3. Configure the Multi-site IPsec VPN settings.

Protection plan

To configure a Multi-site IPsec VPN connection from a protection plan

  1. In the Cyber Protect console, go to Devices.
  2. Apply a protection plan to one or multiple devices from the list.
    The recovery server and the cloud infrastructure settings are automatically configured for Site-to-site Open VPN connectivity.
  3. Go to Disaster Recovery > Connectivity.
  4. Click Show properties.
  5. Click Switch to Multi-site IPsec VPN.
  6. Configure the Multi-site IPsec VPN settings.
  7. Reassign the IP addresses of the cloud network and cloud servers.