--- title: Tackling Hard Disk Corruption description: A How To on using Windows chkdsk utility to address storage disk corruption. The Windows DISKPART utility is also discussed here in part. canonical_url: https://www.acronis.com/en/blog/posts/chkdsk/ locale: en last_updated: 2026-10-27 --- [Acronis Blog](https://www.acronis.com/en/blog/) # Tackling Hard Disk Corruption A How To on using Windows chkdsk utility to address storage disk corruption. The Windows DISKPART utility is also discussed here in part. [Try Now](https://www.acronis.com/en/products/true-image/trial/) [![Image 2: Acronis Editorial Team](https://staticfiles.acronis.com/images/content/d85707ae91461544212d39836dc32b42.png)](https://www.acronis.com/en/blog/authors/acronis/ "Acronis Editorial Team") [Acronis Editorial Team](https://www.acronis.com/en/blog/authors/acronis/) 15 min read Last updated 20 November 2018 Other languages available:[Deutsch](https://www.acronis.com/de/blog/posts/chkdsk/) [Español](https://www.acronis.com/es/blog/posts/chkdsk/) [Français](https://www.acronis.com/fr/blog/posts/chkdsk/) A How To on using Windows chkdsk utility to address storage disk corruption. The Windows DISKPART utility is also discussed here in part. Imaging you’ve just purchased [Acronis True Image](https://www.acronis.com/en-us/personal/computer-backup/). You set out to create a backup image of your Windows Operating System disk. You set up the backup task and run it ... and then, trouble! * After the task completes you discover that the size of the backup is bigger than the total amount of data on the disk. (Possible disk corruption causing Sector by Sector backup to be created) * Your task fails to run, possibly just stopping completely or displaying an error message stating that the backup cannot complete due to corruption. * You find that your system disk is not selectable or displays a red X next to it. What is the cause of such behavior? These symptoms are typical when corruption exists on the selected Backup Source disk, either in the filesystem itself, or what is known as a “bad sector” (physical damage) on the disk. The same holds true for Source and Target disks during Recovery operations. How do you fix such corruption? Windows provides a utility tool known as **_chkdsk_** that can correct most errors on a storage disk. The chkdsk utility must be run from an administrator command prompt to perform its work. In this How To article, we will learn what chkdsk does and how to use it to overcome the issues above, as well as others not listed in the intro here. So what does chkdsk do exactly? Good question. The primary function of chkdsk is to scan the filesystem on a disk (NTFS, FAT32) and check the integrity of the filesystem including filesystem metadata, and fix any logical filesystem errors it finds. These errors might include corrupt entries in a volume’s master file table (MFT), bad security descriptors associated with files, or misaligned time stamp or file size information about individual files. Chkdsk can also scan for bad sectors. Bad sectors come in two forms: soft bad sectors, that occur when data is written badly, and hard bad sectors that occur because of physical damage to the disk. Chkdsk attempts to fix these problems by repairing soft bad sectors and marking hard bad sectors so they won’t be used again. How does a hard disk become corrupted? Another good question. Anytime Windows shuts down abnormally or has a system crash, it can cause corruption. Over time, you can expect that you will experience such corruption. Running chkdsk as part of a normal maintenance routine is good practice if you wish to do so. Enough of the technical stuff, let’s see what we can do with the chkdsk utility. First, let’s outline the tools various command line switches and their uses. chkdsk [[[]]] [/f] [/v] [/r] [/x] [/i] [/c] [/l[:]] [/b] **Parameters** **Parameter** **Description** Specifies the drive letter (followed by a colon), mount point, or volume name. [] Use with file allocation table (FAT) and FAT32 only. Specifies the location and name of a file or set of files that you want **chkdsk** to check for fragmentation. You can use the **?** and ***** wildcard characters to specify multiple files. /f Fixes errors on the disk. The disk must be locked. If **chkdsk** cannot lock the drive, a message appears that asks you if you want to check the drive the next time you restart the computer. /v Displays the name of each file in every directory as the disk is checked. /r Locates bad sectors and recovers readable information. The disk must be locked. **/r** includes the functionality of **/f**, with the additional analysis of physical disk errors. /x Forces the volume to dismount first, if necessary. All open handles to the drive are invalidated. **/x** also includes the functionality of **/f**. /i Use with NTFS only. Performs a less vigorous check of index entries, which reduces the amount of time required to run **chkdsk**. /c Use with NTFS only. Does not check cycles within the folder structure, which reduces the amount of time required to run **chkdsk**. /l[:] Use with NTFS only. Changes the log file size to the size you type. If you omit the size parameter, **/l** displays the current size. /b NTFS only: Clears the list of bad clusters on the volume and rescans all allocated and free clusters for errors. **/b** includes the functionality of **/r**. Use this parameter after imaging a volume to a new hard disk drive. /? Displays help at the command prompt. As you can see there are a lot of options allowed in the chkdsk tool which can provide some advanced operations. Primarily for this discussion we will be looking at two of the most useful and commonly used options. They are: * **chkdsk _X_: /f** * **chkdsk _X_: /r** **Note:**Where **_X_:** is the letter of the drive partition where chkdsk is to be run. Let’s look at some screenshots for the above commands to become more familiar with them. ![Image 3: command prompt](https://staticfiles.acronis.com/images/content/2f60836d7b972b3fe4e3d86748bd7afa.png) command prompt The above screenshot shows the result of chkdsk with **/f** option used on the C: partition. As you can see the command resulted in not being run because of the disk being used by another process. It offers to run on the next restart if desired, typing **y** allows for the scan to take place. This is common when running chkdsk while booted to Windows. Another note here is that the **/r** option of chkdsk results in this same message as shown below: ![Image 4: chkdsk](https://staticfiles.acronis.com/images/content/952e01759959839dea1292d686ac718d.png) chkdsk What happens if we run chkdsk on the C: partition without any options? Below is a look at one result. When chkdsk is run without options, it runs in Read Only mode and reports on the overall health of the filesystem on the specified partition. This is a good scan to run on your disk partitions as a routine maintenance of your disks. If the scan check results in finding an issue with the filesystem, then running or scheduling a run of chkdsk /f will then attempt to fix the found error(s). ![Image 5: chkdsk without options](https://staticfiles.acronis.com/images/content/dc543122419baacab5e6120020a0a41f.png) chkdsk without options So what difference does using the /r option make in chkdsk? Chkdsk used with the /r option runs a “Stage 4:” scan of the partition and looks for bad clusters in user file data. Once that completes, the utility will display how many files were processed and the status of that scan. After the Stage 4 scan, the utility then runs a “Stage 5” scan of the partition and looks for bad free clusters on the disk. Once this scan completes, the utility displays how many free clusters were processed and the status of the scan. Below are screenshots of each Stage of the chkdsk /r scan once completed. ![Image 6: chkdsk scan - stage 1](https://staticfiles.acronis.com/images/content/ed2fd194d725e557cfcbdd759c383fba.png) chkdsk scan - stage 1 ![Image 7: chkdsk scan - stage 2](https://staticfiles.acronis.com/images/content/4ffd6977a871f5b6b25080f54f821e67.png) chkdsk scan - stage 2 ![Image 8: chkdsk scan - stage 3](https://staticfiles.acronis.com/images/content/d7cf3c0b09fea8de03773ad277944c1d.png) chkdsk scan - stage 3 ![Image 9: chkdsk scan - stage 4](https://staticfiles.acronis.com/images/content/8a9f2bb05f4378d22e8c21106c2f7645.png) chkdsk scan - stage 4 ![Image 10: chkdsk scan - stage 5](https://staticfiles.acronis.com/images/content/6c993fca2960f943f6ab3c517ab24344.png) chkdsk scan - stage 5 After chkdsk finishes with a scan, the utility displays a summary of what was found and a status of what if any actions were performed. Below is a summary result of a disk scan that found no errors. ![Image 11: chkdsk summary](https://staticfiles.acronis.com/images/content/f51c87701927987b97f368d7fa5b4ec8.png) chkdsk summary Now that we have covered the primary usage of the chkdsk utility, it is time to delve into using the utility on a Windows System OS disk. We have already discovered that chkdsk will not run on a booted Windows System C: partition/volume unless/until a restart of the computer occurs. You may have noticed at this point that chkdsk works on individual partitions on a disk. A Windows System OS disk formatted as a GPT disk, as most modern Windows installs are, may have several partitions on a disk. The fact is that disk corruption may exist on any partition on a disk. Corruption may exist on more than one partition on a single disk as well. Additionally, Windows System disks will have partitions on a disk that are not assigned drive letters which makes using the chkdsk utility on them a more challenging task. So how do you deal with the issues raised above? Good question! Let’s have a look at how to deal with these issues. To begin, let’s have a look at a typical Windows 10 install on a GPT formatted disk by using Windows Disk Management. ![Image 12: Windows Disk Management](https://staticfiles.acronis.com/images/content/ba23e5db106a03e77f429f0cf443327c.png) Windows Disk Management As you can see in the screenshot above, this disk has four partitions. They are a Recovery (450 MB), EFI (99 MB), Windows 10 PRO (237.08 GB), and OEM (861 MB). Take note that only one partition has a drive letter assigned, which is the Windows 10 partition having the letter (C:) assigned as you would expect. The other three partitions have no letter assignment. In order to use the chkdsk utility to look for and fix disk errors the utility must be run on each partition of the disk, one at a time. It is necessary then to temporarily assign drive letters to the partitions not having letter assignments to perform a chkdsk scan on them. It is possible to use the Windows Disk Management tool to assign a drive letter to these partitions. To do so, place your mouse cursor inside the partition you wish to assign a letter to and left button click there. You will notice that the background of the partition takes on a hashed look as shown below. ![Image 13: Assign drive letter](https://staticfiles.acronis.com/images/content/1af3a76b9df122d7ce0bc28b7f25d33b.png) Assign drive letter Once the partition is selected, leaving your mouse cursor inside the selected partition, click the right mouse button, a new menu will appear which will allow you assign a letter to the partition. Select **Change Drive Letters and Paths** as shown below. ![Image 14: select partition](https://staticfiles.acronis.com/images/content/9adeebeee0def0fc833c64d7b988820d.png) select partition Disk Management will automatically select the next in order available letter for this assignment as shown below. Click on OK to assign the letter. ![Image 15: Click on OK to assign the letter](https://staticfiles.acronis.com/images/content/9ca1d04b31d9a93910a9de22528d8a07.png) Click on OK to assign the letter The screenshot here and below shows the partition has been assigned the letter F:, which now enables you to run a chkdsk scan on that partition. ![Image 16: scan partiton](https://staticfiles.acronis.com/images/content/487e180cde51d4e27b77ee09ff5a4992.png) scan partiton You may find that Disk Management is unable to complete the assignment of a drive letter task. When you select a partition as outlined above and right button mouse click it you may simply see a small box with the word Help displayed. Another issue that occurs is that the option to Change drive letters and Paths is greyed and is therefore non-selectable. There can be a number of reasons for this. One of the most common reasons is that the format of the partition is not NTFS or FAT32. In this case, the only way to resolve the issue is to **Delete** the **Volume** and reformat it. This situation is usually the result of the disk itself being previously used in a MAC. Another issue that may be in play is that the partition has a Read Only attribute set. [Removing the Read Only attribute](https://blogs.technet.microsoft.com/askcore/2011/06/02/my-disk-is-read-only-help/) will solve that issue In other circumstances it will be necessary to use another Windows utility to make the letter assignment to the selected partition. The utility we will use to do this is the diskpart utility and must be run from an administrator command prompt. For a How To on command prompt usage click [HERE](https://www.digitaltrends.com/computing/how-to-use-command-prompt/). Following are the steps necessary to assign drive letters to Windows System disk partitions that do not have assignments using the **diskpart** utility. For this example, we will be assigning the drive letter **X:** to the **Recovery** partition on our example disk. Open the Windows Command Prompt as Administrator and type **diskpart** to start the utility as shown below. ![Image 17: Windows Command Prompt as Administrator](https://staticfiles.acronis.com/images/content/495226fc63cb994d05ea9acf0918a1b8.png) Windows Command Prompt as Administrator Notice the command line changes to read DISKPART. With the utility now running type at the DISKPART prompt **list volume** as shown below. ![Image 18: DISKPART utility](https://staticfiles.acronis.com/images/content/887380bd2653cb5df06bc25ba6e2d94b.png) DISKPART utility Notice that all volumes installed on the computer are displayed using this command including those on other disks. You should note here that we only need to assign letters to those partitions that do not have existing letter assignments so that chkdsk can be run on them. In the screenshot above these partitions/volumes are Volumes 1, 3, and 4. In our example here, we are going to assign drive letter **X:** to Volume 1, the **Recovery** partition. To do that we first must place focus on Volume 1. * At the DISKPART command prompt type **select volume 1** to place focus on Volume 1. * At the command prompt type **assign letter**=**X** to assign the letter X to the volume/partition. * At the command prompt type **list volume** to display the volume list and confirm that letter X has been assigned to the desired volume/partition. **Note: The asterisk to the left of Volume 1 below. This indicates that Volume 1 is the “in focus”/selected object and commands issue will take effect on that object.** ![Image 19: disk volumes](https://staticfiles.acronis.com/images/content/0b9e92853c91fbbee584fffd81cc91af.png) disk volumes Note that diskpart displays a response confirming that Volume 1 is now the selected or “in focus” object. With Volume 1 now “in focus”, you can perform your task of assigning a letter to it. (NOTE: The = sign in the previous command is not bolded. This is to signify that the = argument is not necessary for the command to work even though you will find this as part of the command in many references). After you have run the assign letter X command note that diskpart responds with a message stating the desired assignment was completed. Of particular note: I should point out that when assigning a letter to a GPT formatted EFI partition, using the diskpart **list volume** command will not work. The reason for this is because the EFI partition is actually a part of the “System” partition. In order to assign a letter to that partition, you must substitute the **list****volume** command for the **list partition** command instead. Please review the screenshot below for an overview of these substitutions. ![Image 20: subpartitions](https://staticfiles.acronis.com/images/content/4a57c22782d60bf26bc22dfc590abd8e.png) subpartitions Now, to run the **chkdsk** command, it is necessary to leave the diskpart utility. At the prompt type **exit**. This will end the utility returning your command prompt to read **C:\WINDOWS\system32>**. At this prompt you can now run the **chkdsk** utility scans desired. Have a look at the screenshot below for running the command **chkdsk x:/f**to illustrate. ![Image 21: chkdsk x:/f command](https://staticfiles.acronis.com/images/content/e5df811b1544b906f2c64f859477019d.png) chkdsk x:/f command Note that three scan “Stages” of the **/f** option of the **chkdsk** command are run. It is recommended when disk corruption is suspected that you forego use of the **/f** option of the **chkdsk** command and instead use the **/r** option. Using the **/r** option includes **/f** in the scan so you will be doing both using the **/r** option. Once your **chkdsk** scan completes you can now use the **diskpart** utility again to remove the drive letter you assigned to the volume/partition so that all is back to normal. At the Windows command prompt type * **diskpart** to start the utility. * At the **DISKPART** prompt type **list volume** to display all Volumes/Partitions. * At the prompt type **select volume 1** to select the desired partition. * At the prompt type **remove letter x** to remove the previously assigned drive letter. * At the prompt type **list volume** to display the volume list and confirm letter removal. The screenshot below illustrates the above command sequences. ![Image 22: command sequences](https://staticfiles.acronis.com/images/content/faf43e952d8e165e4fd4b9d3cde6160d.png) command sequences **Note: Substitute list disk / list partition in the above example for EFI partitions.** The screenshot below shows confirmation of successful drive letter removal. **Note: The asterisk shown to the left of Volume 1 indicates the “in focus”/selected volume/partition.** ![Image 23: partition with the removed letter](https://staticfiles.acronis.com/images/content/4f4727b43c1e5619aab0ec084bfac662.png) partition with the removed letter You can follow these steps to assign drive letters to the other non-lettered partitions on disk so that **chkdsk** scans can be performed on them. Chances are that you will find errors on one or more of these partitions. Once the **chkdsk** scans and error corrections are applied you should then be able to backup or restore your disk. This concludes our How To on Tackling Storage Disk Corruption using Windows’ built-in utility tools **chkdsk** and **diskpart**. With this instruction you should be able to deal with disk corruption effectively which in turn will allow [backup](https://www.acronis.com/en-us/business/backup/) [and recovery](https://www.acronis.com/en-us/business/backup/) of your system. [Data protection](https://www.acronis.com/en/blog/tags/data-protection/) [Cloud backup](https://www.acronis.com/en/blog/tags/cloud-backup/) [Disaster recovery](https://www.acronis.com/en/blog/tags/disaster-recovery/) [Data loss prevention](https://www.acronis.com/en/blog/tags/data-loss-prevention/) ## Written by ![Image 24: Acronis Editorial Team](https://staticfiles.acronis.com/images/content/d85707ae91461544212d39836dc32b42.png) Acronis Editorial Team Acronis is a global cyber protection company that provides natively integrated cybersecurity, data protection, and endpoint management for managed service providers (MSPs), small and medium businesses (SMBs), and enterprise IT departments. [Previous post](https://www.acronis.com/en/blog/posts/acronis-cyber-cloud-78-enhances-cyber-protection-80-new-features-and-improvements/) [Acronis Cyber Cloud 7.8 Enhances Cyber Protection with 80+ New Features and Improvements](https://www.acronis.com/en/blog/posts/acronis-cyber-cloud-78-enhances-cyber-protection-80-new-features-and-improvements/) [Next post](https://www.acronis.com/en/blog/posts/how-to-block-cryptomining-scripts-in-your-browser/) [How To Block Cryptomining Scripts In Your Web Browser](https://www.acronis.com/en/blog/posts/how-to-block-cryptomining-scripts-in-your-browser/) About Acronis Acronis is a leader in AI-native cyber protection, unifying data protection, cybersecurity, IT operations and hybrid infrastructure to deliver business continuity, security and compliance with less cost and complexity. More than 21,000 service providers trust Acronis to protect over 750,000 businesses in 150 countries. Acronis is headquartered in Schaffhausen, Switzerland. [Add as a preferred source on Google](https://google.com/preferences/source?q=acronis.com) ## Related stories Want to learn more? Read the latest stories featuring this solution on our blog. [Acronis Blog](https://www.acronis.com/en/blog/) ![Image 25: Acronis Cloud Storage adds a recovery warranty](https://staticfiles.acronis.com/images/blog-card/6a693ef2012c6324f65b0b452c11b3d6.png) [Acronis Cloud Storage adds a recovery warranty](https://www.acronis.com/en/blog/posts/acronis-cloud-storage-adds-a-recovery-warranty/) Secure, scalable cloud storage with a recovery commitment backed by Acronis. The Anti-Ransomware Recovery Warranty that helps MSPs make recovery a visible part of the service they deliver. **October 12, 2026**4 min read ![Image 26: Acronis Cyber Protect v17: Improving cyber resilience across people, data and infrastructure](https://staticfiles.acronis.com/images/blog-card/c2467c28c0278609eb3560cb2a8a4d53.png) [Acronis Cyber Protect v17: Improving cyber resilience across people, data and infrastructure](https://www.acronis.com/en/blog/posts/acronis-cyber-protect-v17-improving-cyber-resilience-across-people-data-and-infrastructure/) Acronis Cyber Protect v17 Q3 2026 expands integrated cyber protection with new capabilities that strengthen security awareness, improve backup operations and extend protection across more virtual environments. The result is stronger cyber resilience, simplified operations and broader protection delivered through a single platform. **October 05, 2026**4 min read ![Image 27: SCADA backup and recovery: protecting PC-based supervisory control systems](https://staticfiles.acronis.com/images/blog-card/541eac32c82d84a5616d868ed24a68e0.png) [SCADA backup and recovery: protecting PC-based supervisory control systems](https://www.acronis.com/en/blog/posts/scada-backup-and-recovery/) SCADA backup differs from IT backup. Learn what to capture, how to plan recovery, and how Acronis Cyber Protect for OT supports PC-based OT systems. **September 11, 2026**8 min read