Acronis Blog
Authors
Acronis
Acronis
Acronis

Latest stories from Acronis

21 December 2012  — 1 min read
Acronis Blog
Acronis
21 December 2012  — 1 min read
The Post-Holiday BYOD Party Could Cause an IT Cliff – So be Ready!
Next week, as the record numbers of iPads purchased this holiday season are finally unwrapped, millions will be pondering the countless ways to use their shiny new devices. They may pause to think about the iPad’s workplace advantages, but IT managers have already been thinking about (and fretting over) the huge flood of personal devices logging onto corporate networks and accessing sensitive company data on January 2nd. The prospect of a “BYOD IT Cliff” has never been greater.
14 December 2012  — 1 min read
Acronis Blog
Acronis
14 December 2012  — 1 min read
2012 – Another Great Year for Acronis’ Channel
This past year has been one of the most successful in Acronis’ history – and much of that success would not have been possible without our strong channel partner program. In 2012, our partner community grew significantly – from January to October alone, we added 735 new partners, and, from the first half to the second half of the year, we saw a 40 percent increase in partner deal registrations!
07 December 2012  — 2 min read
Acronis Blog
Acronis
07 December 2012  — 2 min read
Emerging IT Trends at this Week’s Gartner Data Center Conference in Las Vegas
At the Gartner Data Center Conference in Las Vegas this week ,Acronis’ CMO Scott Crenshaw was among the great technology minds attending (and tweeting!) on the future of the IT landscape. The hashtag #GartnerDC was created to allow attendees to share their thoughts, engage in conversations and discuss industry trends – and let those of us not as fortunate to be in attendance follow along. Some of the trending topics stemming from this week’s show included issues surrounding Big Data, data storage and, of course, the cloud.
11 October 2012  — 1 min read
Acronis Blog
Acronis
11 October 2012  — 1 min read
Make the Most of Your IT Budget in Q4
Welcome to the fourth quarter, the time when most IT departments are working hard to tie up loose ends and complete projects before the end of the fiscal year. Economic conditions have caused organizations to do more with less. They are tasked with protecting a growing amount of mission-critical data, often with a shrinking budget.
10 August 2012  — 1 min read
Acronis Blog
Acronis
10 August 2012  — 1 min read
Never Underestimate Your Resource & Skillset Requirements
The final post in this series of five hidden DR hazards involves underestimating your resource and skillset requirements. When creating a do-it-yourself disaster recovery solution, you must consider your team’s personal priorities and also their ability to access your remote site.
30 July 2012  — 1 min read
Acronis Blog
Acronis
30 July 2012  — 1 min read
Failed Testing: Another Hidden Hazard of DIY DR
Building a disaster recovery site can be an exciting project for ambitious IT teams. It involves a great deal of planning and results in a high degree of satisfaction once the environment is complete, the budget is justified and the equipment is procured and configured. Overall it is a gratifying experience– until it’s time to test the solution.
10 July 2012  — 1 min read
Acronis Blog
Acronis
10 July 2012  — 1 min read
How to Avoid Hardware/ Software Drift
I’ve been writing about the hidden hazards of do-it-yourself disaster recovery. One of these hazards is hardware/software drift. Since your disaster recovery site represents a working replica of the production environment, it will need to be maintained on an ongoing basis. There are several strategies for how hardware and software are provisioned for your DR site. The strategies you choose will determine the how much maintenance will be needed to keep your DR site running at an optimal level.
03 July 2012  — 1 min read
Acronis Blog
Acronis
03 July 2012  — 1 min read
How to Choose a Remote Colocation Site
Choosing a disaster recovery location is critical to the success of any DR project. One of the biggest mistakes that you can make is to choose a colocation site that is too close to your production site. It’s way too easy for a power grid failure to knock out both your primary and your colocation site if both sites are located in the same metropolitan area. (It happens!) But the challenge of in-house DR is that the technical team responsible for bringing your DR site online will need access to that site. This means that the approach and technology used to deliver a disaster recovery solution must be capable of remote activation. Learn more about remote activation in the nScaled white paper The 5 Things That Can Go Wrong With DIY Disaster Recovery: 5 Things That Can Go Wrong With DIY DR
28 June 2012  — 1 min read
Acronis Blog
Acronis
28 June 2012  — 1 min read
The Hidden Hazards of SAN-to-SAN Replication
It might be tempting to create a “do-it-yourself” disaster recovery solution by purchasing additional hardware and installing it in a branch office or colocation facility. But creating an effective disaster recovery solution is a complex project and there are several unplanned costs and other hidden hazards associated with it. I’ll identify some of these hidden hazards over the next few weeks.
04 May 2012  — 1 min read
Acronis Blog
Acronis
04 May 2012  — 1 min read
Recovery-in-a-Cave
Just got done reading the funniest white paper ever, from our friends at Iron Mountain. It asks the question, “…what happens when the devastation is so fierce that it hits the backups too? Don’t panic.”
04 April 2012  — 1 min read
Acronis Blog
Acronis
04 April 2012  — 1 min read
Really?
Disco Stu has moved from Springfield to the world of backup and DR.
14 March 2012  — 1 min read
Acronis Blog
Acronis
14 March 2012  — 1 min read
Boston Fire leads to customer failover
The power outage affected the Boston office one of our large disaster recovery customers. We protect 70 servers in 11 offices around the US for this customer.